To connect through Wi-Fi, make sure your device is on the same network as your Android TV. On your remote, press Home. At the top right, select Settings . Under “Network & Accessories,” select Network Advanced Network status. Find the Wi-Fi network name, listed next to “Network (SSID).”. Make sure it’s the same as the network on your Try this First!!! Before you take your tv remote apart or buy a new one try this method. If your tv remote is acting funny, has a mind of its own, if the pow It happens because the Samsung TV remote, TV itself along with most of the other devices at home gets connected to the same 2.4 GHz wifi frequency which often conflicts with the remote itself causing it to disconnect. To change the wifi frequency channel on your router, navigate to the router admin page (GUI) and then click on the wifi settings 3. Enter the 3-digit remote code for your TV brand. 4. Repeatedly press the Channel Down button until your TV is turned off. 5. The remote will be paired if the TV gets turned off. 6. Press the Power button to switch on the TV and tap OK to store the code. How to Pair Motorola 800 Remote. 1. Press and hold the TV button for about six seconds. 2. This plugin cannot detect whether the TV is sleep or not, so the status cannot be synchronized between HomeKit and TV. When the remote key is pressed, HomeKit sends a "activate" command which makes homebridge-mitv send a power keystroke request. I haven't found a workaround yet. Point the remote control at the illumination LED or status LED. On the remote control, press and hold the POWER button for at least 5 seconds or until a Power off message appears. The TV restarts automatically. Wait for approximately one minute and the TV will turn back on. If after one minute the TV does not restart, on the remote control .

mi tv remote problem